But I do not know how it showed in practice, is it still in production, will there me spare parts, etc. To protect against legal liability All the BBS02B’s I’ve had from Bestebike have the plug coming off the motor for the gearshift sensor. DIY Lithium Batteries: How to Build Your Own Battery Packs It sounds to me like the ‘keep current’ is set too low in the controller configuration settings. Google uses the data collected to track and monitor the use of our Service. Mid-drive motors are more efficient and produce more torque (rotational force) but they can cause premature wear and tear on the drive-train of the bike. I was planning on using the lower power modes when climbing? Lectric eBikes Reviews Brilliant!
The bike does not have suspension, weighs 9.5kg and has carbon front fork.

Quick question, would any of the Bafang kits work on the following bikes:Trek 7.2 FX circa 2008Trek 2.3 circa 2009I wanted to start it out on 7.2 FX bike and eventually move it to the road bike.Thanks in advance and keep up the great work.John. The only real viable alternative is the Tongsheng TSDZ2.

The Bafang kit does seem most appealing but unsure of which model to go for. You’ll need a crank puller and a bottom bracket removal tool (for a JIS square tapered BB). Well, I’ve decided to go either sidewinder or the Schwinn 700c Copeland Men’s Hybrid Bike. Cookies and Usage Data Good luck a thanks for your support!George. And just wanna say you really go above and beyond to help out! We use your data to provide and improve the Service. I’m after some advice and hope you can help.I converted my cheap Hybrid Carerra Crossfire II using the BBS02B 48v 750W coupled with a Hailong 48v 19.5amp Samsung cell battry about two months ago and have been using it on the wagonway tracks to and from work ever since.A couple of days ago I set of to find no power coming from the motor, PAS or throttle. I’ve converted a few 2017 Voodoo Bizango’s (yellow ones) and generally they are very straightforward to convert. Thanks for taking your time to explain everything to novices like me! I’ve just fitted a 750w 48v bafang to each of our two bikes. from various locales, The Bafang BBS02 is available in three different configurations: 36v 500w / 48v 500w and 48v 750w. Ebikeling do a good range of rear hub motors and ship from within the US – here is a link to their conversion kits on eBay. Do you think this kind of road bike is OK for a Bafang conversion or would it be better to instead get hold of a bike with suspension and not so light.
Lithium batteries tend to lose around 20% when the temperature dips below -10. It works well, nice neat install with the controller being in the battery mount, doesn’t feel like there is much assistance on levels 1 and 2 but power really kicks in on levels 3 4 5, and it shoots up hills on level 5 with minimum effort.Thanks again for the info and help.

For sales-related concerns, pls call. Google may use the collected data to contextualise and personalise the ads of its own advertising network. Cookies are small files stored on your device (computer or mobile device). Electric Bike Adult Ebike, BAFANG 350W Brushless Motor, 36V/10.4Ah Removable Lithium-Ion Battery 3 Hours Fast Charge, Electric Mountain Bike with Dual Disc Brakes, White at Walmart.com

I must have fitted well over 50 of these kits over the last couple of years without any issues. I reckon I very rarely ride it at more than 250 – 350 watts. It comes with 28t sprocket as standard and the chain stays flare out barley any room at all. Which one would you choose of the two? I liked the idea of the steel frame. I have just checked out the specification of your bike on the Specialized website, and it uses a Samox BSA 73mm bottom bracket, so the Bafang BBS02B should be a perfect fit. Can be placed right next to the brake clamp on a 22mm bar on the left and can be operated with a thumb. You can instruct your browser to refuse all cookies or to indicate when a cookie is being sent. There are a few torque-sensing hub motor kits available but I find small hub motors lacking when it comes to steep off-road climbs. If you have any more questions, please let me know. The only other issues I have come across on occasion is the motor lockring may need to be periodically tightened, and you may find fitting the battery to be a tight squeeze or the holes on the battery mounting plate will not align with the bottle cage bosses. If you want to put a cherry on top of that get a Gates belt drive and have a better ebike than any production ebike on the market today. What would you advice to do?Thanks in advance. Dual Battery Design Al Frame, LG 48V 30Ah. I have a Cube Hyde Team 2011 with a Shimano Alfine 8 speed hub, would it be suitable for the Bafang 48V 500 W. How difficult is it to change the power assist levels to make the power assist similar to the Bosch eco, tour and emtb and can you st it up for power assist only with no throttle function;Thanks,David. I couldn’t find this on the Pashley website but I’m assuming it’s a BSA 68mm threaded bottom bracket, but sometimes bikes with geared hubs have an eccentric bottom bracket to facilitate chain tensioning.

No problems, no failures and miles of pain free riding, this bike uses a Shimano Alfine internal gear hub. Required fields are marked *, This post contains affiliate links, to find out more information, please read my affiliate disclosureIn this article I’m going to, This post contains affiliate links, to find out more information, please read my affiliate disclosureFollowing on from the success of, This post contains affiliate links, to find out more information, please read my affiliate disclosureI recently discovered this new twist, This post contains affiliate links, to find out more information, please read my affiliate disclosureIn this article, I’ll be taking. If you do replace the controller you’ll need to make sure it’s for a BBS02 ‘A’ model. I hope this info helps, if you have any more questions, please let me know. So problem with 24″ wheels although it seems an unusual size for an adult bike – usually they’re 26″, 27.5″ or 28″. Cyclone Mid Drive 3000 Preference Cookies. Hi Tony,Love this article. I usually fit front wheel hub motors to tricycles. Your email address will not be published. If you paid with a credit card or PayPal you should also be covered. You can enable or disable location services when you use our Service at any time by way of your device settings. I was going to buy 48V 750W 14aH unit. The BBS02 is no longer available as far as I know. If you need any more advice, please let me know. I just went with a Schwinn 700c Copeland Men’s Hybrid Bike. Can’t find a Samsung option. Thanks for reading and If you have any questions about the Bafang BBS02B, please feel free to leave a comment below – I check this at least once a day and usually answer questions within 24hrs. do you know if there is a good blog or you tube how to install this in a catrike or ice trike? Affordable performance. I’ve fitted the throttle but don’t anticipate using it. The Ti-FLY features an advanced full-suspension frame and sophisticated system of adjustability that gives the rider the most comfortable ride. Also you need to watch the threads on the crankarms / crankset when you remove them as they tend to be made of Swiss cheese (plus they don’t always grease the BB axles) – when you’ve removed the Allen bolts and screwed in the crank puller, make sure it’s tightened fully in the thread (usually with a 17mm spanner) before you try to remove them.

Data Controller means the natural or legal person who (either alone or jointly or in common with other persons) determines the purposes for which and the manner in which any personal information are, or are to be, processed. I hope this info helps, let me know if you have any more questions. I bought it through the PSWPOWER store on Aliexpress.com and they say their 1yr warranty is for repair only with the customer baring the cost of the shipping each way. Either the P850c or DP-C18 are the best displays currently available. If you would still prefer to fit a 52v battery, then it would be worth buying a spare motor controller.if(typeof __ez_fad_position!='undefined'){__ez_fad_position('div-gpt-ad-ebikechoices_com-large-leaderboard-2-0')};✅Link to trusted vendor. Can I just buy 42 tooth independently ? Do I change my cassette? Motor cannot be pushed all way in, so there is a problem with chain line. Would this be a problem? Gosh that’d be amazing!

IMF Research Bulletin, June 2006 Effective date: August 07, 2018 I’m currently looking at Schwinn models like the AXUM Sidewinder or Copeland 700c hybrid or even a Trinx brand m500? Oh just saw this! It would be worth investing in a much smaller chainring, by either buying a Lekkie Bling ring or PreciAlps chainring – I would say about 36t on the front would be good with an 11-36 or 11-40 rear cassette. Large CapacityThe combined overall capacity reaches 75L, adding more splendor to your trip.Simple design solves complex problemsBy optimizing the combination, the three packages are integrated... Easy to Clean When the ebike cover is stained with mud, it can be rinsed directly with water. I would really appreciate Your answer and your experience with Bafang motors. You think that adapter like this will do the job ?https://ozo-electric.com/en/accessories-for-mid-drive-motors/1010-shimano-pressfit-bottom-bracket-adapter-for-bafang-middle-drive-motor-bbs.html. The Lapierre Esensium 300 is designed from the ground up to fit the female form, with an ultra-durable multi-alloy frame and a comfortable Selle Italia X3 XP Lady Boost Saddle. Not many will do it gratis!Cheers,Mak, Thanks Mak, glad to have been of assistance.All the best,Tony. Will this fit? Best Bike Rides Long Island describes 40 of the greatest recreational rides in the Long Island area.

The best way to set the power to be more like the Bosch would be to get a USB Programming lead and download the free software and use the Hackers guide to programming the BBS02 found on the electricbike-blog.com.

You will have enough thread to tighten the inner lockring, but you may not be able to fully tighten the outer lockring. It won’t trouble me anymore for the rest of the ride so long as I don’t turn the controller off. Nearly all 90’s mountain bikes and hybrids have a regular bottom bracket plus they’re made of steel which is a good, tough frame material? I haven’t converted one of these before and looking at the groupset I would say it has either a Truvativ Powerspline, SRAM GXP or SRAM Dub pressfit bottom bracket. See my guide on how to install a Bafang BBS02. California Ebike,LLC will retain your Personal Data only for as long as is necessary for the purposes set out in this Privacy Policy. You have the right to object to our processing of your Personal Data. I just installed this kit a month ago.Its the BBS02 500-750w model. Glad to help, if you need any more info, let me know.

If you need to use the throttle regularly, it would be worth changing the throttle ‘start current’ settings in the controller firmware (you will need a compatible USB lead and software). The lower gearing the better as this will help the motor to spin faster and remain cooler on the long climbs. The right to withdraw consent. Hi Tony,Great site! One thing to bear in mind with the TSDZ2 is there is limited clearance for gear cables routed underneath the bottom bracket, so you might need to re-route the cable. There’s sometimes some good deals on eBay, there’s quite a few sellers who sell old bikes and will ship them anywhere within the country. If you are planning longer hilly rides, the BBSHD should definitely be more reliable in the long term, especially if it is used in the lower power levels, it runs a lot cooler and is a bit more efficient than the BBS02. Hi Tony, thank you for helping everyone out. Bestebikes on Aliexpress are doing a good deal at the moment on the BBS02B 750w with a 48v 17Ah battery and DP-C18 colour display – Here is the link (they ship from Spain or Poland so delivery is fairly quick). I have tested the 500w on a climb near me over 1.6km with average gradient of 10% (with 15-20% sections) and it handled it very well. If 48V 750W motor is technically the same as 36-500, then I choose the last one. I don’t thrash it and my reason for the 750 watt was durability due to the larger coil and heat dissipation at lower power outputs. Bafang Ultra Max, the Luna Cycle have some pretty good 48v battery packs available and they might be able to custom-build one to fit in the frame. Legal Basis for Processing Personal Data under the General Data Protection Regulation (GDPR) If California Ebike,LLC is involved in a merger, acquisition or asset sale, your Personal Data may be transferred. Data Subject (or User) Hot Selling MTB Full Suspension E Bike 1000W Bafang Ultra G510 MID Drive System Electrical Bicycle. If so, can you send me a proper link to smaller tooth cog in front? Anywhere I can find out?? Google Analytics The 35E Samsung cells are a big improvement on the older 29E cells. Do you still suggest I do that? We use this data to provide features of our Service, to improve and customise our Service. shimano brakes levers are one of the easier levers to convert to hydaulic sensors, as they have relatively flat surfaces to mount the sensor & magnet too. Material: Aluminum Color: Black All accessories can be used for Bikonit ebikes only, we do... 88 There is a YT video from Luna Cycle of a 300lb guy riding one up a long steep climb in California and the motor barely got warm. While we strive to use commercially acceptable means to protect your Personal Data, we cannot guarantee its absolute security. Here is a link to a very good instructional thread on electricbike.com. Re the battery, I took a gamble on Amazon with an unbranded one with no reviews and at a high cost but it has done me proud and is fine about 4 + years on. Under certain circumstances, California Ebike,LLC may be required to disclose your Personal Data if required to do so by law or in response to valid requests by public authorities (e.g. Does the bbs02b kit come with a wider bb option like the bbshd?ThanksKev.

I’m keen to get started on a BBSHD conversion but I’m concerned it might not be compatible with my bike. Best Bike Rides Long Island: The Greatest Recreational Rides ... The right to access, update or delete the information we have on you. Looking at the specifications they should be fairly straightforward to convert. Here is a link to a seller on Amazon.com who has good feedback ratings, although I think they probably ship direct from China. Another thing you will need (if you don’t already have one) is a 1/2″ breaker bar – this will give you enough leverage to remove the bottom bracket, as they can be a right sod to remove at times.

I tried troubleshooting it w/ the Bafang technician, but it got too involved w/ checking the BMS, etc. Hi Roy,It’s definitely a good idea, especially if you’re going to rely on your bike for regular transport. The main issue is a 73mm wide BB is at the limit of a standard BBS02 motor shaft, and if you need to use spacers (due to the chainstay angle) it won’t leave enough thread to fit the outer motor lockring. You have the right to complain to a Data Protection Authority about our collection and use of your Personal Data. After about 16K miles on my BBS02 it started to make some noise. I’ve not encountered these persistent problems with the pedal assist before, so there could be something else at fault in the motor itself. I hope this helps, if you need any more info, give me a shout. For Model MD750/MD1000/HD750 LG Chem 21700 Cell Advanced BMS System Safer & More Reliable Intelligent Dual Battery Balancing Module Lock System Integrated Indicator Aluminum Shell One-click... 13 17 Best Electric Bikes: eBikes Guide For Everyone (2021) The Bafang motors are generally reliable if ridden sensibly. The only issue I’ve had is they tend not to grease the bottom bracket’s too well and they can sometimes require a lot of force to remove. I would be putting it on a Giant Sedona comfort bike 15 inch frame and will mostly be riding on roads that aren’t terribly hilly with my 10 year old son (could eventually do some mild mountain bike trails). Yes, the BBS02B 48v should be a fine fit.

I’ve just installed the same kit on a Marin hybrid for a customer and I had the same issue with the battery. In certain circumstances, you have the following data protection rights: Contents: (1) Intro.; (2) What are Rare Earth Elements (REE)?; (3) Major End Uses and Applications: Demand for REE; The Application of REE in National Defense; (4) Rare Earth Resources and Production Potential; Supply Chain Issues; Role of ... I hope this helps, let me know if you have any more questions. A detailed how-to guide teaching you everything you need to know in order to plan and create your own solar powered systems.

Thanks Tony for the quick response , with this info this brand sounds like the one to go withRegardsMike. Although the 750W rear hub motor is a powerful one, it’s not without flaws. Also it’s not easy to help it climbing uphill by pedaling.But I live high uphill and have to overcome 1,5 km of ascent 15-30% incline everyday. I have ordered one and can’t wait to give my legs a bit of help on hills. This data is shared with other Google services. If your tandem is of traditional design then you would not be able to install a Bafang motor due to the chainring configuration. Considering this 2 aspects, which of the two Bafang kits would you recommend – BBS02B 750w or BBSHD? The HPC Revolution AT is the best off-road electric mountain bike you can buy, thanks to hand-welded components, such as the ultra-sturdy aluminum … We need to perform a contract with you The Tongsheng provides a more natural assistance, very similar to the Bosch motors commonly found on factory ebikes. Don’t know if one is made with buttons on opposite side for right hand side though. Hi Tony looking to do my 1st conversion I have a whyte 603 2015 just not really sure what to go for does weight come into equation when choosing what size motor to buy dont really want a free ride all the time just now and again and what battery is best for the motor. I converted my GT Verb mtn bike earlier this year (full suspension) with the Bafang 500w front hub motor kit, 27.5″ wheels (integrated 48v 18amp controller, 48v 11.6ah ultra slim shark samsung battery 2900-18650cells, ebrake sensors for disk brakes and the DPC-18 display). The main setting to change is the pedal assist ‘start current’.

Anyhow, I’ve regained my interest and bought a new Luna 52v battery. You should be able to get a larger chainring from Amazon or eBay. Many people even prefer these bikes to cars. Hybrids are generally more straightforward to convert than MTB’s. Phone number I have already purchased a 52 volt 14ah battery. The first fault occurred with the controller and I needed to replace it with a supposedly modified one. Thank you for the very informative article and thank you in advance for your reply. It features rear coil-over suspension and integrated front suspension, not to mention 20x4 FAT tires that provide suspension as well. Thanks, Don. I need some advice from you. The sensitivity of the Tongsheng torque sensor can be adjusted using advanced settings on the VLCD5 display. I have yet to test out a Lingbei mid-drive – looking at the design the primary gear looks a lot more robust in design and there are quite few companies in the UK and EU selling it under their own brand names. Last year I installed a BBS02 on a new Boardman MTB and only used the inner lockring and this hasn’t caused any issues. thank you for this review! I think you will struggle to fit the TSDZ2 on a Cube Aim frame – it’s a great motor, but has a major design flaw in the clearance between the motor shaft and housing. Some of the colour displays can be problematic – I find the black and white C965 display to be the most reliable, although the latest DP-C18 colour display seems to be pretty good (although most of these displays only allow for 5 levels of pedal assist). This is not a job to be taken lightly, but it is possible if done correctly. I have a Merida Speeder 400 and am considering fitting a Bafang BB 250W or W750 to it. Personally I think the BBS02 750w will provide way more power than you would normally need – when I owned one for a year I very rarely used it about level 3 (out of 9) but it depends on how steep the hills are. I did it in the same way as the 1st one had been done which was working OK. I would go with the 36t sprocket, much better for climbing and better for the motor in the long run. I have installed more BBS02 750w motors than any other (in excess of seventy units) and I have had a high rate of controller failure (17%). I am puzzled a bit on the chainwheel , it is 42 tooth and Day6 say to buy a kit with a 42 tooth, however as I look at most of the kits on Amazon very few have 42 tooth chain wheels. Also the maximum current is set to 25A on the 36v 500w, I always drop this a little to 20-22A which gives a bit of a buffer zone. You may need to adjuster the rear derailleur slightly to compensate for the offset, but I haven’t found this to be too much of an issue on the Cube. I also use Lekkie geometry corrected cranks as the stock ones mean your feet are different distances from the centre of the bottom bracket. I have purchased kits and batteries from Eclipse in the past without any issues, my only complaint is they can take a while to answer emails. You can buy the gear sensor off Aliexpress for less money, but it usually means waiting for delivery from China. Could you please give me a live tutorial? Being a 2014 model it is probably a Shimano Hollowtech II or pressfit bottom bracket. I have just checked the spec on the 2010 Cube Stereo and it does appear to have a standard threaded Hollowtech II BB, with Shimano XT groupset. Using E-Bike technology out of this world! I did have a look on their website, but couldn’t find the BB type in the specification list. You’re welcome. Mountain Bikes Hello Tony, Love all the informative treasure here ! I have swapped out a 36v25A 500w controller before for a 48v25A 750w controller (plus 48v battery) without any issues. It may be worth increasing the gearing on the front from 44t to 48t. I don’t have any experience with converting bicycle to e-bike, and wondering could the Bafang fit or not hmm. You have the right to request that we restrict the processing of your personal information. Will i need a specific chain for the bike i purchase or are they pretty much universal and I just resize with a chain breaker and universal master link? Apart from that, everything went smoothly. Hello Tony, I read that the Bafang BBS02 has a “Coaster Brake”. Regarding the torque settings, 50Nm seems quite high, I’ve always tightened them to 20 ft-lb (27Nm).

As far as reliability is concerned, I have installed nearly 40 TSDZ2 motors and only ever had a couple of minor issues. Passionate E-Bike advocate and enthusiast.

It varies from bike to bike. A demonstration of the gearshift sensor working, on a BBSHD powered bike.

What is your take on rear hub vs mid drive for Fat Tire bike build? I researched installtion online and , at 75 years old , the instalation has taken me nearly 3 weeks, with mistakes and corection along the way.I opted to fit a 36t chainring from China which produced an excessive chain-line resulting in chain pullin away from the chainwheel in low gear.I’m not sure whether a Bling Ring 36 t would cure this or would the chainline still be excessive. I think it has the Hollowtech 2 bottom bracket but not sure where to find this info. I am concerned about how little room I have in the area where it comes close to the chainstay.

Ultimate Imposter Height, Nursing Management Slideshare, Heligoland From Hamburg, Notre Dame Medical School Statistics, Best Orthopedic Trauma Surgeons, Similarities Between Compound And Electron Microscope, Elegant Catering Food Truck, Natural Diamond Commercial,

bafang ultra full suspension frame